Response SL5 Instruções de Operação descarregar pdf (Página 31)

PROGRAMMING

SA5 29

24 Hour Intruder

- used to provide 24 hour monitoring of areas

requiring continuous security protection even while

the system is Disarmed, (e.g. gun lockers).

Activation of any detector on a security zone will

immediately initiate an alarm.

Fire

- use to provide 24 hour monitoring of any Fire/Smoke

detectors fitted to the system. Activation of any

detector will immediately initiate an alarm.

Test

- when the system is armed, any detector on the zone

will generate an entry in the Event-Log without

initiating an alarm.

Default setting: ‘Intruder’

Scroll through the menu until ‘3-2 Z01 Type’ (and the

current setting) is displayed.

To change the setting press .

Scroll through the menu options until the required

setting is displayed.

Press to save and exit, or

Press to exit without saving.

FINAL EXIT SET

This controls whether the zone will trigger the systems

final exit set feature. Triggering a detector on a “final Exit

Set Zone” during the exit-delay will reset the remaining

exit-delay to 5s.

Default setting: OFF

Scroll through the menu until ‘3-3 Z01 Final Exit Set’

(and the current setting) is displayed.

To change the setting press .

Press to enable the zone’s Final Exit Set

facility, or

Press to disable the zone’s Final Exit Set

facility.

CHIME

This controls whether the zone will operate with Chime

Mode.

Default setting: OFF

Scroll through the menu until ‘3-4 Z01 Chime’ (and

the current setting) is displayed.

To change the setting press .

Press to enable the zone in Chime Mode,

Press to disable the zone in Chime Mode.

ENTRY DELAY

Scroll through the menu until ‘3-5 ENTRY DELAY’ (and

the current setting) is displayed.

To change the setting press .

On/Off Status

Default setting: zone 1: ON

zones 2-10: OFF

Scroll through the menu until ‘3-5-1 Status’ (and

the current setting) is displayed.

To change the setting press .

Press to enable the zones entry-delay,

Press to disable the zone’s entry-delay.

Delay Period

Default setting: 30s

Scroll through the menu until ‘3-5-2 Delay Time’

(and the current setting) is displayed.

To change the setting press .

Enter the required delay period (10 to 250s).

Press to save and exit, or

Press to exit without saving.

Press to return to top level Zone Setup

menu.

PART-ARM 1

This controls whether the zone is active when Part-Arm

1 is armed.

ENTER

ESC

ENTER

ESC

Note: Personal Attack, 24 Hour Intruder and Fire

modes all operate on a 24 hour basis, (i.e. they

are able to initiate an alarm at any time even if the

system is Disarmed).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Comentários a estes Manuais

Sem comentários

Response SL5 Instruções de Operação Página 31

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Response SL5