11
3. Adjust the Camera head viewing position as required and tighten all screws using the
allen key tool supplied in the fixing kit.
You can make adjustments to the viewing
positions as shown (Fig. 4).
Note: It is advisable to use cable conduit
to protect any video/power extension
cables from being exposed externally
and to prevent/reduce the chances of
the cables being tampered with.
5.3.2 Connection
Connect between “VIDEO IN” of your DVR and the “VIDEO OUT” of the camera(s) with
the video extension cable(s) supplied. If any additional camera(s) have an extension
cable with a RCA male plug then use one of the supplied BNC to RCA adaptors to convert
to a BNC type for connection to the DVR. Use the 5 way splitter cable assembly already
connected to the DVR’s power adaptor to power each camera (operating on 12VDC
voltage only).
Comentários a estes Manuais