Response SL8 Manual de Instruções descarregar pdf (Página 28)

The zone 1 LED will illuminate to indicate the

current Zone Lockout status.

ED ON Zone Lockout enabled

LED OFF Zone Lockout disabled

To change the setting:

Press

The Zone Lockout status will switch to the

opposite state (enabled/disabled) each time the

button is pressed.

Press to

save the new setting and exit to

Program Mode, or

Press to exit without saving

JAMMING DETECTION

This controls the systems anti-jamming detection

facility. It is recommended that the jamming

detection is not activated for at least the first 30

days to allow time for you to become familiar with

the operation of your systems first.

Default setting: OFF (disabled)

Press

The zone 1 LED will illuminate to indicate the

current Jamming Detector status.

LED ON Jamming Detection enabled

LED OFF Jamming Detection disabled

To change the setting:

Press

The jamming detection status will switch to the

opposite state (enabled/disabled) each time the

button is pressed.

Press to

save the new setting and exit to

Program Mode, or

Press to exit without saving

Note: The jamming detection program setting

will only control the jamming detection feature in

the Control Panel. The jamming detection

function incorporated in the Siren operates

independently.

SPECTRA LIGHTING STATUS

Press

he current status of the Spectra Lighting control

eatures is indicated on the zone 1 LED as follow:

Spectra Lighting Control

Disabled (OFF) zone 1 LED OFF

Spectra Lighting Control

Enabled (ON) zone 1 LED ON

To change the setting:

Press

The On/Off status will switch to the opposite

state on each button press.

Press to

save the new setting and exit to

Program Mode, or

Press to exit without saving

SPECTRA LIGHTING TIME-ON PERIOD

Press

The current setting for the Spectra lighting time-on

period will be displayed on the zone LEDs as follow:

Time on Illuminated Selection

period LEDs Button

0 all off press

1 minute zone 1 press

2 minutes zone 2 press

3 minutes zone 3 press

5 minutes zone 4 press

10 minutes zone 5 press

20 minutes zone 6 press

To change the setting:

Press the button corresponding to the required

alarm period, the corresponding zone LED will

illuminate as the setting is changed

Press to

save the new setting and exit, or

Press to exit without saving

ZONE OPERATING MODE

Each alarm zone provides only a standard intruder

monitoring with normal Arm and Part-Arm functions.

ENTER

ESC

ENTER

ESC

ENTER

ESC

ENTER

ESC

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Comentários a estes Manuais

Sem comentários

Response SL8 Manual de Instruções Página 28

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Response SL8