Response SL5 Manual de Instruções Página 28

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 64
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 27
28
MAG Detector – Alarm
MAG Detector – Tamper
Smoke Detector – Alarm
Smoke Detector – Tamper
ALARM TEST – WIRELESS SIREN TEST
Scroll through the menu until Wirefree Siren Testis
displayed on the LCD.
Press to activate the wireless siren for 5s.
During the test the LCD will display:
Press to stop the test early.
ALARM TEST – INTERNAL/WIRED
SIREN TEST
Scroll through the menu until Internal Siren Test’ is
displayed on the LCD.
Press to activate the Control Panel siren for 5s.
During the test the LCD will display:
Press to stop the test early.
ALARM TEST – WIRED SIREN TEST
Scroll through the menu until Wired Siren Test’ is
displayed on the LCD.
Press to activate the wired siren for 5s.
During the test the LCD will display:
Press to stop the test early.
ALARM TEST – AUXILIARY RELAY TEST
Scroll through the menu until Auxiliary Relay Test’ is
displayed on the LCD.
Press to activate the Auxiliary Relay (n.o./n.c.)
contacts for 5s.
During the test the LCD will display:
Press to stop the test early.
LINKING THE CONTROL PANEL TO
SPECTRA LIGHTING RECEIVER
In order for the Control Panel to be able to activate
the Spectra Lighting Receiver the panels code must
be learnt into memory on the Receiver. To do this
the panel must transmit a code to it.
To link the Control Panel to the Spectra Lighting
Switching Receiver…
1. Place the Spectra Receiver into Learn
Mode…
Send the ID codes from the panel to the
Spectra Receiver…
2. Scroll through the system menu until ‘Link
Panel to Spectra Lighting’ is displayed.
3. Press
The LCD will display ‘Sending ID Code wait
5s” for 5s.
After 3 seconds a “lights on for 10s” signal
will be transmitted by the control panel to the
Spectra receiver to learn the panel’s code
into memory.
The Receiver will automatically exit Learn
mode. ‘lights on for 10s’ signal.
Zone X : MAG
Alarm
Zone X : MAG
Tamper
Zone X : Smoke
Alarm
Zone X : Smoke
Tamper
Siren ON for 5s
Stop->ESC
Siren ON for 5s
Stop->ESC
ENTER
ESC
Siren ON for 5s
Stop->ESC
ENTER
ESC
Siren ON for 5s
Stop->ESC
ENTER
ESC
ENTER
ESC
ENTER
Vista de página 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Comentários a estes Manuais

Sem comentários