Response SL5 Manual de Instruções descarregar pdf (Página 27)

27

DETECTOR TEST

Before commencing testing please ensure that there

is no movement in any PIR protected area for at

least 3 minutes, all doors/windows protected by

Door/Window Detectors are closed and that all

battery covers are correctly fitted.

Note: It may be helpful to have a 2nd person to

assist with this test.

Scroll through the top level Test Mode menu until

‘Walk Test waiting…’ is displayed and press .

If your system includes Remote Controls:

For each Remote Control:

1. Activate each button on the Remote Control

in turn including the PA switch. As each

button is pressed the Control panel will beep

and the button name will be displayed,

e.g. ‘Remote Disarm’ will be displayed when

the button is pressed.

If your system includes PIR Detectors:

For each Detector:

2. Ensure that the area protected by the PIR

has been free from movement for at least

3 minutes and then walk into the area to

trigger the detector

Note: To conserve power the PIR will only

detect movement if there has been no

movement detected within the previous

2 minutes.

When the detector is triggered the Control

Panel will beep to indicate that a signal has

been received and display the zone of the

detector that was activated.

3. Remove the battery cover from the detector

to operate the anti-tamper switch.

The Control Panel will beep and ‘Zone x :

PIR Tamper’ will be displayed.

If your system includes Door/Window Detectors:

For each Detector:

4. Open the protected door/window to trigger

the detector.

When the detector is triggered the Control

Panel will beep to indicate that a signal has

been received and display the zone of the

detector that was activated.

5. Remove the battery cover from the detector

to operate the anti-tamper switch.

The Control Panel will beep and ‘Zone x :

MAG Tamper’ will be displayed.

Press to exit Walk Test and return standby.

TEST FUNCTION SUMMARY

When signals are received from linked devices the

appropriate messages will be displayed on the LCD

as follows:

Remote Control/Keypad - ARM

Remote Control/Keypad – PART-ARM 1

Remote Control/Keypad – PART-ARM 2

Remote Control/Keypad - DISARM

Remote Control/Keypad – PANIC/PA

PIR Detector – Alarm

PIR Detector – Tamper

ENTER

ESC

Remote/Keypad

Arm

Remote/Keypad

Part-Arm 1

Remote/Keypad

Part-Arm 2

Remote/Keypad

Disarm

Remote/Keypad

Panic/PA

Zone X : PIR

Alarm

Zone X : PIR

Tamper

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Comentários a estes Manuais

Sem comentários