Response SL5 Manual de Instruções descarregar pdf (Página 13)

The panel will now listen for a valid signal from a

new Remote Control or Keypad.

The Panel will remain in Learn Mode for 30s.

If a valid signal is not received from a new

device within 30s it will automatically exit

Learn Mode and return to the top of level 2.0.

5. Press on the Remote Control, or

Press on

the Remote Keypad.

If the device is new and not already linked to the

system the control panel will produce two short

beeps and the display will show ‘New Device’

and the type or the detected device;

(e.g. Remote or Keypad).

6. Confirm the new device ID code from the same

new Remote Control or Remote Keypad within

15s as follows:

Press on the Remote Control, or

Press on

the Remote Keypad.

The panel will produce three short beeps and

the LCD will show ‘Device Confirmed’.

The LCD will then show ‘Saving New Device’

while the ID code of the new detector is stored

into memory.

7. Press twice to return to standby.

TESTING THE CONTROL PANEL AND

REMOTE CONTROL

1. Press to put the

system into Test Mode.

Use the and buttons to scroll through

the menu until ‘Detector Walk Test’ is displayed.

2. Press to activate Walk Test.

During the test the LCD will display:

3. Press the Arm, Part Arm, Disarm and Personal

Attack buttons in turn on the Remote Control.

Note: If no signal is received by the Control Panel

within 10 minutes, the display will return to ‘Detector

Walk Test’.

When signals are received from linked Remote

Control, the appropriate messages will be displayed

on the LCD screen:

Remote Control - ARM

Remote Control/Keypad - DISARM

Remote Control - PANIC/PA

4. Press to return to the top level menu of

TEST MODE.

Note: If the device is already linked to the

control panel then the panel will produce a

single long beep and the received

signal from the device will be ignored.

Note: If the confirmation signal is not

received within 15s the control panel will

produce a single long beep and exit the

learning process. The learning process will

need to started again to learn the new

device into memory.

Keypad User Access Code

? ? ? ?

Keypad User Access Code

? ? ? ?

ESC

ENTER

, ,

User Access Code

ENTER

Walktest

Waiting...

Remote/Keypad

Arm

Remote/Keypad

Disarm

Remote/Keypad

Panic/PA

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Comentários a estes Manuais

Sem comentários

Response SL5 Manual de Instruções Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Response SL5